What size are the nuts on a toilet? The most common size supply tube connection to the valve is a 3/8-inch hexagon compression nut. If you’re not sure what the size is, or it is not 3/8 inch, you can always remove the supply tube and take it with you for comparison when purchasing a new supply tube.
What size bolts are toilet bolts? Standard Johni-Bolts are 2 ¼” long. They are also available in an extra-long length, which is 3 ½”.
How long are toilet bolts? Big Foot Toilet Bolts – No Spin Toilet Flange Bolts – 5/16″ Threading X 2.5″ Length.
What are toilet bolts called? Securing your toilet to the floor are two long bolts (called closet bolts) that come up through the base of the toilet and are secured with nuts.
What size are the nuts on a toilet? – Related Questions
Can you extend toilet bolts?
YOU NEED INSTALL A SPACER KIT FOR THE FLANGE TO FIRST MAKE UP THE DIFFERENCE BETWEEN THE EXISTING FLANGE AND THE FINISHED FLOOR, THEN BUY LONGER BOLTS, DONT FORGET A NEW WAX RING. bolt stretcher. The tool is much too expensive to purchase for a single job, but toilet bolts come in two sizes, standard and oversize.
How tight should toilet tank bolts be?
Bolts Don’t Have to Be Extremely Tight
The tank-to-bowl bolts are merely there to ensure the rubber seal between the tank and bowl is snug and leakproof. Tank bolts do not need to be tightened to an extremely snug position.
Why are my toilet bolts loose?
The flange bolts that secure the toilet base are themselves held by a metal or plastic ring at the top of the toilet flange. The ring can corrode or break, loosening its grip on the bolts. If your rocking comes back after a while, or if the bolts loosen up and won’t retighten, a damaged flange is likely the cause.
Are there different size toilet bolts?
The job of the toilet bolt is to help create a watertight seal between the toilet bowl and the toilet flange and to secure the toilet to the floor. There are three possible measurement distances you can get from the wall to the toilet bolt: 10 inches, 12 inches, or 14 inches. The most common is 12 inches.
Why does my toilet swivel?
Your wobbly toilet may be moving because the mounting bolts that hold it down have nothing to grab onto anymore. You might think your loose toilet bowl is held down to the floor by a couple bolts. While this is true, you should know that the bolts don’t go directly to the floor. Instead, they secure to a toilet flange.
How do I know if my toilet is leaking from underneath?
The main signs of a leaking toilet may include a damp area on the floor around the bottom of the toilet, a spongy feeling in the floor at the bottom of the toilet seat, signs of dampness on the ceiling in the room underneath your toilet, or the occasional smell of sewer gas and the flooring coming up in the area around
What holds a toilet to the floor?
The toilet flange, also known as a closet flange, is the part of the toilet that secures the unit to the floor and connects to the drain pipe. Usually made of PVC, rubber or metal, this piece is circular in shape and usually secured in place with a few bolts.
Do you need to bolt a toilet to the floor?
Your toilet should be fixed to the floor using several bolts. Carefully unscrew the nuts and washers to help free the toilet. Your toilet may also have silicone around the base to make it more secure. Use a screwdriver to pick these off to expose the bolts.
Do you need a plumber to install a toilet?
Yes. A toilet is part of your plumbing system, and needs to be installed by a licensed and qualified plumber. If you are undertaking a complete bathroom renovation and replacing your toilet as part of this job, your bathroom renovator needs to be appropriately licensed and use a plumber for this job.
Is there a seal between the toilet tank and bowl?
The point of connection between a toilet tank and toilet bowl is sealed by a rubber gasket which rarely needs replacing. Rubber has a tendency to dry out with age, however, and it can eventually crack.
Can you replace toilet bolts without removing toilet?
You can’t replace a closet bolt without removing the bowl. Pull the bowl, and next time pick up brass bolts. Not the coated steel bolts.
Should I caulk around toilet?
Caulk prevents a fouling area. If mop water, bathtub water, or a less pleasant “bathroom liquid” gets underneath the toilet, there is no way to clean it up. Caulking around the base of the toilet will prevent this from happening.
What saw to cut toilet bolts?
If you use a hack saw blade, cut part way through, and then wiggle the bolt back and forth until it breaks away. If you try to cut it all the way through, the saw can slip past the bolt and scratch the bowl.
What are snap off bolts?
Shear snap off fasteners are amongst the highest security permanent fasteners available on the market. They are fastened using a standard spanner or socket. On tightening, the hexagon portion snaps off leaving a plain head that cannot be removed.
Can you tighten a loose toilet seat?
If your toilet seat is loose, then you need to tighten it. The seat is usually attached to the toilet bowl with bolts and nuts. Use a screwdriver to tighten these bolts, and you should be able to solve the problem. If your seat is more seriously damaged, then you may consider buying a new toilet seat.
How do you know if toilet bolts are too tight?
Exactly – the point of the bolts is to hold the toilet in place, NOT to create the seal. The seal is created by the wax ring. One quarter turn too far on that bolt and you’ve ruined a multi hundred dollar toilet. If it doesn’t move when you sit on it, it’s tight enough!
Should the toilet tank touch the bowl?
When it is well-compressed, the tank will be nice and firm — it doesn’t need to actually touch the porcelain of the bowl, it just needs to be well-tight above the bowl.
What size wrench do I need for a toilet?
Metal seat bolts: The deep-well socket option
If the bolts are metal, you might be able to unscrew the nuts with a pliers, but the best tool for this job is a socket wrench equipped with a deep-well socket (Photo 1). Most toilet seats require a 1/2-in. socket.
COMMENTS